Ultra-High Vacuum Systems Application Note
High Sensitivity Detectors for XRF
Application Note AN-SDD-003: Amptek Silicon Drift Detectors (pdf 600k)
CdTe Detectors for Quantitative X-Ray Fluorescence – Presentation 1.1 MB
CdTe Measurement of X-Ray Tube Spectra: Escape Events (ANCDTE-1 Rev. A1)
Response of CdTe Detectors
Characterization of CdTe Detectors for Quantitative X-Ray Spectroscopy – Paper 500 k
XR-100T-CdTe Efficiency Application Note (AN-CdTe-001) – 300 k
XR-100T-CdTe Charge Transport Application Note (ANCZT-2 Rev. 2) – 660 k
Digital Pulse Processor FAQ
Digital Pulse Processors - Theory of Operation
Advanced Acquisition Modes - List mode - Streaming mode
Using Baseline Restorer Mode 3 (BLR 3)
Dead Time in Amptek’s Digital Pulse Processors
High Count Rate Performance with Amptek FAST SDD® Detectors
Using the DP5 with Germanium (HPGe) Detectors – 600 k
Secondary Pile-up Rejection in Amptek DPP's
Using Ethernet on Amptek Digital Devices
Gamma-Rad5 Frequently Asked Questions (FAQ)
Application Note AN-GRD-001: How Sensitive is the Gamma-Rad? – 250 k
VeriTainer Radiation Detector for Intermodal Shipping Containers – Paper 270 k
Advice for Quantitative Analysis – 32 k
XRF FP Thin Film Analysis – Lead Paint Example – 640 k
Quantitative XRF Analysis using FP – 82 k
XRF Spectra and Analysis Software – 3.2 MB
Understanding XRF Interferences in Detectors
Grounding and Shielding in Amptek Products
Saving a .mca File and Requesting Diagnostic Data
Troubleshooting Guide for Amptek Digital Pulse Processors
How to chose the anode material for an X-Ray tube
Use of Filters on an X-Ray Tube
Use of Mn secondary target to mimic 55 Fe source
Detector Efficiency FAQ pdf – 140 k
Efficiency Package: Coefficients