Skip to content

TB-5 Digital Tube Base for Scintillator and PMT

The TB-5 Digital Tube Base contains all the electronics needed for high performance spectroscopy with your scintillator and photomultiplier tube (PMT). It contains a preamplifier, a full-featured digital pulse processor with MCA, a high-voltage power supply, and all low voltage power supplies.

Product Overview

TB-5 PMT Digital Tube Base for Gamma Spectroscopy

It can be controlled and powered over USB or Ethernet (PoE). The TB-5’s auxiliary interfaces and flexible architecture can be easily tailored for specific applications and advanced data acquisition options. It is all packaged in a low power, compact tube base, and offers direct integration with Sodigam gamma-ray analysis software for scintillation spectrometers (optional)

Contact us for more information today! 


  • Homeland Security, including portal monitors, shipping containers, handheld monitors
  • First responders and emergency workers
  • Nuclear safeguards verification
  • Toxic dump site monitor
  • In situ processing
  • Environmental or industrial monitoring
  • Teaching and research
  • For OEMs and custom users


  • Compatible with standard scintillation spectrometers
  • USB or Ethernet (10T-PoE) for control and power
  • Flexible architecture for tailoring interfaces
  • Includes pulse height acquisition, MCS, SCA, and List Modes; supports pulse shape discrimination
  • Optional Sodigam gamma-ray spectrum analysis software and software development kit with examples


  • Digital pulse processor (DPP) with charge sensitive preamplifier and multichannel analyzer (MCA)
  • All power supplies (low voltage and high voltage)
  • Interface hardware and PC software
  • 14-pin photomultiplier tube base

Typical Performance with NaI(Tl)

  • Dynamic range: 10 to 3000 keV
  • Resolution:         <7% FWHM @ 662 keV, <5% @ 1.33 MeV
  • Count rates:         Up to 200,000 counts per second (CPS)
  • Power:                   750 mW typical
  • Typical Applications +

    Nuclear Safeguard or Environmental Monitor

    An example program is provided to aid in long term monitoring where weak sources are present. This program automatically saves a spectrum at user defined intervals, it provides gain stabilization using the 40K background peak, and it provides a simple ROI analysis capability to verify if suspect counts are present above preset thresholds. This software can run on a laptop, connected to the system by a USB cable. It can also run over an Ethernet link and the Internet, and be monitored on the other side of the world. The plot on the right shows a background spectrum and measurements from natural UO3 and a lantern mantle containing natural thorium.

    Simultaneous Neutron Detection with Gamma-Ray Spectrum

    Simultaneous Neutron Detection with Gamma-Ray Spectrum

    The pulse shape discrimination capability of the Digital Tube Base enables one to detect thermal neutrons and measure a gamma-ray spectrum, simultaneously, with a single module. The key is the use of a “Phoswich” detector, a sandwich of two scintillators (with different time constants) mated to a single photomultiplier tube. At Amptek, we used a unit containing a LiI(Eu) crystal coupled to a NaI(Tl) crystal. The lithium is enriched in 6Li, providing efficienct detection of thermal neutrons via the 6Li(n,a) reaction. The two scintillators produce different pulse shapes so the pulse shape discrimination logic distinguished between them, counting the neutron events while measuring the gamma-ray spectrum.

    Fast Neutron Detection

    A fast neutron detector was fabricated, using an EJ-410 phosphor (zinc sulfide phosphor embedded in a plastic matrix) coupled to a 5” PMT. Fast neutrons undergo proton recoil interactions in the strongly hydrogenous polymer, producing a large optical signal. Gamma-ray interactions are eliminated by setting an appropriate threshold. This is a counting system, rather than a spectroscopy system, but uses pulse height analysis to discriminate between the species. The compact digital tube base with its PoE interface and software environment make implementation of a complete system straightforward.

  • Specifications +

    TB-5 Specifications

    Compatible with standard 14 pin scintillation detectors using 10 stage PMTs. This includes NaI(Tl), CsI(Na), BGO, LaBr and many others. The resolution, efficiency, and maximum count rate are primarily determined by the scintillation crystal. The TB-5 digital tube base is for users providing their own scintillator and PMT. For an integrated product, including the scintillator, PMT, and tube base, please refer to Amptek’s Gamma-Rad5.
    Pulse Processing Performance
    Gain Settings Four software selectable coarse gain settings (1.5
    to 7). Fine gain is adjustable between 0.75 & 1.25.
    Pulse Shape Trapezoidal, typically set to 2.4 μs peaking time
    (1 μs shaping time constant), software selectable
    from 0.8 to 102.4 μs. The flat top has 63 software
    selectable values for each peaking time. The fast
    channel, used for pile-up rejection and pulse
    shape discrimination, has a pulse pair resolving
    time of 0.25 μs.
    Gain Stabilization The gain from scintillators and PMTs is well known
    to vary with temperature. A software gain stabilization
    algorithm is available.
    Maximum Count Rate, Dead Time, and Throughput With the typical configuration, Tpeak=2.4 μs, the
    maximum input count rate is 150 kcps with a
    throughput of >50% and good baseline stability
    and pile-up rejection. At Tpeak=0.8 μs, the maximum
    input count rate is 200 kcps.
    Custom Configuration The DP5G is set at the factory for either a 20 MHz
    or 80 MHz clock. For NaI(Tl), 20 MHz is standard.
    The 80 MHz setting is recommended for custom
    scintillation materials with faster decay times,
    fast pulse shape discrimination, or other unique
    requirements. It draws about 50% more power.
    MCA Performance
    Number of Channels Commandable to 8k , 4k, 2k, 1k, 0.5k, or 0.25k
    Presets Time, total counts, counts in an ROI, counts in a single
    channel. Minimum acquisition time is <10 ms.
    External Connections
    USB Standard 2.0 full-speed (12 Mbps). Provides both
    serial data and power.
    Ethernet 10Base-T or UDP, DHCP or fixed IP. (PoE)
    RS-232 Standard serial interface 115 Kbaud.
    DAC Output Single pin LEMO connector.
    Aux I/O Gate, 8 SCAs
    +5 V Average current 150 mA. Can be powered from
    USB, PoE or external. No external PoE injector required.
    Range 3.0 to 6.4V
    High Voltage A stabilized, high efficiency Cockroft-Walton power
    supply provides PMT bias. HV is software controlled.
    0 to +1,200 V
    Size Ø2.44 in x 4.02 in; Ø62mm x 102 mm
    Mass 8.4 oz; 238.14 g
    Interface Software
    DPPMCA The Amptek DPPMCA display and acquisition
    software controls the TB-5 and downloads and
    displays the data. It supports regions of interest
    (ROI), calibrations, peak searching, and more. Runs
    under Windows XP PRO SP3 or later.
    The TB-5 includes an interface to analysis software,
    which processes the raw spectrum to identify
    radioisotopes and to quantify the intensities.
    SDK Free Software Developer’s Kit (SDK) is included.
    Easily write custom code to control your system
    for custom applications or to interface it to a larger
    system. Examples are provided in VB, VC++, etc.
    Also included are examples of low level communication
    protocols, which can be used for applications
    running under Linux or other operating

    Specifications subject to change without notice.

    View our TB-5 Digital Tube Base specifications in PDF

  • Networking and Interoperability +

    Networking and interconnection of radiation detectors frequent poses problems for system integrators. Amptek’s TB-5 digital tube base makes it easy to interface with custom scintillators and also makes it easy to connect large and complicated systems, spread over a large geographic area and involving many different types of radiation detectors.

    The TB-5 can easily interface with many scintillators: conventional gamma-ray spectrometers such as NaI(Tl), CsI(Na), BGO, lanthanum halides, and others are straightforward to use. A user can obtain the scintillator and PMT in whatever geometry is best for the specific application. With the TB-5, a single interface to the computer (USB or Ethernet) provides control, data acquisition,and all power supplies. But the TB-5 can be used with other materials. Thermal neutron and fast neutron detectors utilizing scintillators or phosphors and PMTs can be connected to the TB-5. Although these are counting systems and do not necessarily need the high performance signal processing electronics required for spectroscopy, the standard power supplies, communications interfaces, and application software of the TB-5 make operation straightforward. Most systems requiring a 14 pin PMT base can use the TB-5.

    The TB-5 uses the same communications protocols and interface software as Amptek’s other digital pulse processors. This includes the PX5-HPGe (for use with high purity germanium detectors in high resolution gamma-ray spectroscopy), the GammaRad-5 (for ruggedized scintillation applications), the PX5 (a general purpose processor which can be used with CdTe or coplanar grid semiconductors), and the DP5 (a board designed for embedded applications). A single computer can easily interface to a network of dissimilar radiation detectors. The drawing below illustrates just a few concepts for interconnecting radiation detectors using Amptek’s digital processing technology.

    TB-5 Distributed System Using Ethernet

    Using Ethernet, a very large area detector network can easily be established. A single computer can interface to dozens of radiation detectors, spread throughout a building, over many buildings, or across the globe. In a large facility, one can network gamma-ray spectrometers, neutron counters, and even high purity germanium detectors to a central location. Using PoE, a single connection is needed, allowing fast and easy reconfiguration of detector networks. One can locate monitors in many different cities even and, using the globally available Internet, read them from one office.

    The USB interface is ideal for smaller networks, with the 3 meter (max) cable. This works very well in research or operational laboratories. A single laptop can interface with multiple radiation detectors, for example high purity germanium detectors in a counting lab combined with gamma-ray and neutron scintillators used for radiation safety. The auxiliary connectors on all of the processors permit easy integration with external electronics, e.g. using gate signals to do coincidence measurements, to do beam—on versus beam-off measurements, and so on.

    TB-5 Laboratory System

    The RS232 interface is well suited to embedded systems, avoiding the overhead of USB and Ethernet. In a handheld radioisotope identifier, the RS232 interface to the TB-5 is straightforward to implement. One can even use multiple sensors, e.g. combining a DP5 processor to read out a semiconductor detector with the TB-5 mated to a scintillator. In addition, one can use commercially available RS232 adapter modules for other communication protocols: RS232 to Bluetooth, RS232 to WiFi, and others are available.

    TB-5 Embedded System

    In short, the TB-5 is a powerful tool, providing a standard and flexible tool for connecting scintillation based radiation detector systems.


    TB-5 PMT Digital Tube Base Architecture


    TB-5 with 51x51mm NaI(Tl) detector and PMT measuring 137Cs; resolution is 6.1% at 662 keV peak of 137Cs


    TB-5 with 51x51mm NaI(Tl) detector and PMT measuring 60Co; resolution is 6.1% at 662 keV peak of 137Cs


    TB-5 with 51x51mm NaI(Tl) detector and PMT measuring uranium oxide


    TB-5 with 51x51mm and 76x76mm NaI(Tl) detectors and PMT measuring 137Cs


    TB-5 with 51x51mm NaI(Tl) detector and PMT measuring 137Cs at various distances