Skip to content

Accessories for XRF/EDS

  • EXVC X-Ray Collimator Kit

    The EXVC Collimator Housing can accommodate up to two Tungsten (W) collimator disks that are placed inside a bayonet holder in front of the detector. By selecting the appropriate Tungsten collimator disks, the user can reduce the incoming X-ray flux and allow the detector and electronics to process the X-ray spectrum. Seven different Tungsten collimator disks are provided with different size holes in order to allow for a wide range of applications.

    Keep Reading
  • eMLC-1 External Collimator for Amptek SDD Detectors

    Amptek’s eMLC-1 External Collimator is an accessory which can be used to reduce the flux of X-rays entering Amptek’s SDD and Fast SDD® detectors from wide angles, improving background and reducing spectral interferences. The optimum external collimator depends strongly on the geometry of a particular instrument; many customers will design their own collimator for their application. This is a general purpose tool which helps in many applications and is a basis for customization.

    Keep Reading
  • Vacuum Applications for Amptek Detectors

    The XR-100 box or the AXR/PA-230 can be placed inside the chamber. In order to avoid overheating and dissipate the ~1 Watt of power needed to operate the unit, good heat conduction to the chamber walls should be provided by using the appropriate mounting holes.

    Keep Reading
  • Patented C-Series Low Energy X-Ray Windows

    Amptek Patented “C-Series” X-ray windows utilize silicon nitride (Si3N4) with an aluminum coating to extend the low energy response of our silicon drift detectors (SDDs) down to boron (B); they are available exclusively with our FastSDD®.

    Keep Reading
  • MP1 XRF Mounting Plate

    The MP1 XRF mounting plate was designed to facilitate the use of the XR-100, X-123 and Mini-X x-ray tube. The plate provides a standard 45 degree detector to x-ray tube XRF geometry. Mounting holes for both the XR-100 and X-123 are provided. The mounting holes for the X-ray tube are only for use with the Mini-X.

    Keep Reading